SOLVOBOND PVC 501
SOLVOBOND PVC 501 is regular bodied PVC solvent cement for PVC pipes & fittings upto 6” diameter. It is suitable for conduit & low-pressure and drainage systems
Applications
- Regular bodied PVC solvent cement
- Low VOC
- Low Viscous-High Coverage
- Sustain High Pressure
Usage
- PVC pipes and fitting for low pressure and drainage. Assembly recommended at temperature above 5°C. Allowable gap: 0.3 mm. interference: 0.2 mm
- Borewell fittings
- Joining Electrical Conduits
How to use
- Cut the pipe
- Remove burr, roughen and clean the outer surface of the pipe and inner surface of the socket
- Check the dry fit of pipe & fitting. It should go up to end of the fitting easily.
- Apply one coat of Solvobond PVC 501 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket. Again apply second coat on pipe.
- Twist the pipe 45°-90° while inserting into the socket for better spreading of Solvobond PVC 501 and hold for 30 sec.
- Do not move joint for 10 minutes
- Partially emptied container should be close immediately.
NO PRESSURE TEST FOR
- 24 hrs on < 63 mm pipe
- 48 hrs on 75-160 mm pipe
Reviews
There are no reviews yet.