Solvoband pvc 503 1l

SOLVOBOND PVC 501 is regular bodied PVC solvent cement for PVC pipes & fittings upto 6” diameter. It is suitable for conduit & low-pressure and drainage systems

• Regular bodied PVC solvent cement
• Low VOC
• Low Viscous-High Coverage
• Sustain High Pressure

• PVC pipes and fitting for low pressure and drainage. Assembly recommended at temperature above 5°C. Allowable gap: 0.3 mm. interference: 0.2 mm
• Borewell fittings
• Joining Electrical Conduits

• Cut the pipe
• Remove burr, roughen and clean the outer surface of the pipe and inner surface of the socket
• Check the dry fit of pipe & fitting. It should go up to end of the fitting easily.
• Apply one coat of Solvobond PVC 501 evenly using suitable applicator on outer surface of the pipe and inner surface of the socket. Again apply second coat on pipe.
• Twist the pipe 45°-90° while inserting into the socket for better spreading of Solvobond PVC 501 and hold for 30 sec.
• Do not move joint for 10 minutes
• Partially emptied container should be close immediately.

   

  NO PRESSURE TEST FOR

   

  • 24 hrs on < 63 mm pipe
  • 48 hrs on 75-160 mm pipe