Vegacol 5kg

VEGACOL is a poly vinyl acetate based adhesive compounded by proprietary additives. It is mainly used as general purpose adhesive in furniture industry, Laminate pasting, handicraft, packaging, paper tube, etc.

• Laminates, plywood and other hard /soft wood, veneer.
• Particle board, MDF, block board; hard board, etc.
• It is specially made for the handicraft industry and furniture where economical cost concern

• The surfaces to be bonded should free of dust, oil, grease and must be dry and properly levelled.
• For best results, roughen the surfaces to be bonded and stir contents of the container before use.It is a ready to use product so dilution is not recommended.
• Apply a thin coat of VEGACOL on both surfaces then allowed to dry for 5-7 minutes.
• Then bring both the surfaces in contact and align properly. Then keep them pressed for 24 hours for best result.
• Excess adhesive that oozes out from edges should be wiped off with a wet squeezed cloth. Pressure can be applied by using nails, clamps, weight, paper tape
• If required, pressure can be released after 6 to 8 hours and the bonded

18 months from date of manufacturing