Resibond Hybrid 2 in 1 XS Grey 290ml

Resibond 2 in1 Xtra Strength is a high quality, elastic single component joint sealant based on MS-Polymer.

Resibond 2 in 1 Xtra Strength is a RTV (Room Temperature Vulcanizing) hybrid polymer sealant. Once applied, the compound reacts with atmospheric moisture to form a tough and durable elastic seal. It has excellent adhesion to metals, glass, ceramics and plastics. The compound has large gap filling properties, which makes it ideal for application to non-machined surfaces.

• High adhesive strength, on most substrates
• High performance mechanical properties
• Permanently elastic after cure
• Can be painted wet-on-wet with water-based varnishes
• Can be painted with many different types of paints
• Does not contain Silicones or Isocyanates
• Color-fast and UV resistant

• Surfaces to be bonded should be clean, dry, sound and free from dust. If required, surfaces can be cleaned prior to application using an appropriate cleaner
• Mask adjacent surfaces with a protective tape for a neat finish and easy clean up
• Carefully cut the tip of the cartridge, ensuring the threaded area isn’t damaged. Screw on the nozzle supplied and cut to an angle of approximately 45°, to an opening slightly larger than the gap to be filled
• Apply using a standard sealant gun. Extrude the sealant in to the joint, filling the cavity completely. Tool sealant with a soap solution wetted spatula and remove protective tape before the sealant starts to skin. Sealant will begin to cure after 5 minutes, will be touch dry after 1 hour and reach full cure after 3 days (7mm depth). Uncured material should be removed using solvent cleaner (eg. mineral turpentine)
• Apply to a cloth and wipe. Cured material should be removed by sanding or trimming with a sharp blade

12 months in unopened packaging in a dry and cool storage place, at temperatures between +5°C and +25°C.